доц. д-р инж. Галина Илиева

 

Contribution to books

  • “Engineering Applications of Computational Fluid Dynamics”, Series: Advanced Structured Materials, Springer, Vol. 44, 2015, VI, 181 p. 108 illus., 66 illus. in color., ISBN 978-3-319-02835-4
  • Galina Ilieva, Jose Pascoa, Antonio Dumas, Michele Trancossi, Numerical modeling and research of a 3D turbine stage, pp.24, DOI: 10.1007/978-3-319-02836-1_8
  • Galina Ilieva, Jose Pascoa, Antonio Dumas, Michele Trancossi, Unsteady Interaction Effects Between an Airship and Its Air-Jet Propulsion Systems, pp. 17 DOI 10.1007/978-3-319-02836-1_9
  • Galina Ilieva, Jose Pascoa, Antonio Dumas, Michele Trancossi, A novel air-jets propulsion concept for airships - efficiency performance and unsteady interaction effects, CFD – a powerful tool to flow visualizations, Publisher – Springer, about to be published
  • Galina Ilieva, Jose Pascoa, Antonio Dumas, Michele Trancossi, Interaction effects of cruiser-feeder configuration during docking procedure – unsteady flow calculations with a moving mesh algorithm, CFD – a powerful tool to flow visualizations, Publisher – Springer, about to be published
  • Galina Ilieva, Numerical modelling, analysis and visualization of rotating machinery, CFD – a powerful tool to flow visualizations, Publisher – Springer, about to be published
  • Galina Ilieva, On Turbulence and its Effects on Aerodynamics of Flow through Turbine Stages, Publisher – InTech (Thomson Routers indexing), in "Turbulence Modelling Approaches - Current State, Development Prospects, Applications", book edited by Konstantin Volkov, ISBN 978-953-51-3350-6, Print ISBN 978-953-51-3349-0, Published: July 26, 2017

 

 

Articles in international journals with peer review

  • G. Ilieva, I. Kostova, „Biomimetic propulsion as an innovative horizon in water vehicles development“, „Developments in Maritime Transportation and Harvesting of Sea Resources“, volume 2, Editors: C. Guedes Soares & Angelo Teixeira. Publisher CRC Press Taylor & Francis Group, pp.1009 – 1013, 2017.
  • G. Ilieva, I. Kostova, „A prospective turbine concept to extract tidal energy“,  „Developments in Maritime Transportation and Harvesting of Sea Resources“, volume 2, Editors: C. Guedes Soares & Angelo Teixeira. Publisher CRC Press Taylor & Francis Group, pp 1177-1184, 2017.
  • Galina Ilieva, A Deep Insight to Secondary Flows, Transport Problems with a Focus on Fluid and Heat Flow,  Edited by: Antonio F. Miguel, Luiz Rocha and Prof. Andreas Öchsner,  Defect & Diffusion Forum . 2017, Vol. 379, pp.83-107.
  • Galina Ilieva, Mechanisms of Water Droplets Deposition on Turbine Blade Surfaces and Erosion Wear Effects, Journal of Applied Fluid Mechanics, Vol. 10, No. 2, pp. 551-567, 2017
  • Galina Ilieva, Solution Convergence for Flow through Turbine Stages (A Methodology and Approaches), Journal of Applied Fluid Mechanics, 2017, about to be published
  • Galina Ilieva, An Approach for Aerodynamic Design of Gas Turbine, Journal of Applied Fluid Mechanics, 2017, about to be published
  • Galina Ilieva, José C. Páscoa, Antonio Dumas, Michele Trancossi, Innovative fully numerical identification of high-altitude airship aerodynamics, stability and control, Journal of Applied Fluid Mechanics, under review
  • Galina Ilieva, Vectorization through secondary transverse fluid injection in jets propulsion, Journal of Applied Fluid Mechanics, 2017, under review
  • Galina Ilieva, Geometry modeling of 3D turbine stages – how to obtain high quality grid and overcome discretization problems, International Journal of Research – Granthaalayah, 2016, Vol. 4, No. 2, ISSN(Online)- 2350- 0530, pp.197-205.
  • Galina Ilieva, Rhomboid Concave and Convex Dimples Applied for Cooling in Gas Turbines International Journal of Science and Research, 2016, Vol.5, Issue 3, pp.1491-1496 . ISSN (Online): 2319-7064
  • Galina Ilieva, Labyrinth Seals - A Promising and Effective Design, International Journal of Science and Research, Volume 5 Issue 4, April 2016, 1702 – 1706. ISSN (Online): 2319-7064.
  • Galina Ilieva, Erosion failure mechanisms in turbine stage with twisted rotor blades, Engineering Failure Analysis, Volume 70, December 2016, Pages 90–104.
  • Galina Ilieva, Jose Pascoa, Antonio Dumas, Michele Trancossi, MAAT - Promising innovative design and green propulsive concept for future airship’s transport, Aerospace Science and Technology Journal, available online 25.02.2014, DOI: 10.1016/j.ast.2014.01.014, pp. 14.
  • Galina Ilieva, José C. Páscoa, Antonio Dumas, Michele Trancossi, A critical review of propulsion concepts for modern airships, Central European Journal of Engineering*, Received 17 December 2011; accepted 18 February 2012, DOI: 10.2478/s13531-011-0070-1, pp. 12 (* currently is OPEN Journal, De Gruyter)

 

 

International Indexed Conference papers

  • Dumas A., Trancossi M., Pascoa J., Madonia M., Ilieva G., Coppola A., CFD Analysis and Optimization of a Variable Shape Airship, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, IMECE2012, November 9-15, 2012, Houston, Texas, USA. Dumas A., Trancossi M., Pascoa J.,
  • Tacchini A., Madonia M., Ilieva G., Acheon Project: A novel vectoring jet concept, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, IMECE2012, November 9-15, 2012, Houston, Texas, USA.
  • Dumas A., Trancossi M., Pascoa J., Madonia M., Ilieva G., Coppola A., Z.E.T.Ha: Zero Energy Temporary Habitation, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, IMECE2012, November 9-15, 2012, Houston, Texas, USA.
  • Ilieva G., Pascoa J., Dumas A., Trancossi M., “Numerical analysis of aerodynamic performance and propulsion needs for an innovative airship”, DETC2012-70927, Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2012, August 12-15, 2012, Chicago, IL, USA.
  • Pascoa J.P., Ilieva, G., Dumas A., Trancossi M., Overcoming stopovers in cycloidal rotor propulsion integration on air vehicles, Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2012, August 12-15, 2012, Chicago, IL, USA.
  • Ilieva G., Pascoa J., Dumas A., Trancossi M., “Numerical analysis of aerodynamic performance and propulsion needs for an innovative airship”, MEFTE 2012 IV Conferência Nacional em Mecânica dos Fluidos, Termodinâmica e Energia, 28-29.05.2012, Lisbon, Portugal, paper No 57, pp.11, ISBN 978-972-49-2234-8.
  • Galina Ilieva Ilieva, GEOMETRY AND NUMERICAL MODELING OF 3D TURBINE STAGE. PART I Modeling features, TEHNONAV 2010 THE 7TH INTERNATIONAL SCIENTIFIC CONFERENCE ON NAVAL, MECHANICAL, INDUSTRIAL AND POWER ENGINEERING 20-22.05.2010, Ovidius University Annals, 2010, vol. X-1.
  • Galina Ilieva Ilieva, GEOMETRY AND NUMERICAL MODELING OF 3D TURBINE STAGE. PART II RESULTS, TEHNONAV 2010 THE 7TH INTERNATIONAL SCIENTIFIC CONFERENCE ON NAVAL, MECHANICAL, INDUSTRIAL AND POWER ENGINEERING 20-22.05.2010, Ovidius University Annals, 2010, vol. X-1.
  • G. I. Ilieva, R. D. Yosifov, “Geometry Modeling Features for 3D Turbine Cascade with Twisted Rotor Blade in GAMBIT”, Acta Universitates Pontica Euxinius Number 2, Volume 5, 2005; ISSN 1312-1669, pp.7-12.
  • R. D. Yosifov, N.A. Lazarovski, D.A. Kavlakov, G. I. Ilieva “Evaluation to the Possibilities for Improvement of the Aerodynamical Quality of the Turbine Lattices.”- Part I. Acta Universitates Pontica Euxinius Number 2, Volume 5, 2005; ISSN 1312-1669, pp.13-18.
  • R. D. Yosifov G. I. Ilieva N.A. Lazarovski “Evaluation to the Possibilities for Improvement of the Aerodynamical Quality of the Turbine Lattices.”- PartI and II. Acta Universitates Pontica Euxinius Number 2, Volume 5, 2005; ISSN 1312-1669, pp.19-23.

 

 

National Indexed Conference papers

 

  • Г. Илиева, „Числено моделиране и изследване на ерозионното износване на турбинни лопатки при 3D движение на реално течение в турбинно стъпало работещо в областта на влажна пара”, Механика на машините, ISSN 0861-9727, „Дни на механиката”, Варна 2008, „Механика на машините”, книга 4, 2009.
  • Галина Илиева Илиева, „Числено моделиране и изследване на 3D движение на реален поток в турбинно стъпало с радиална хлабина-особености и подходи, сходимост на числената процедура. Част І.”, Годишник на Технически университет, 2008.
  • Галина Илиева Илиева, „Числено моделиране и изследване на 3D движение на реален поток в турбинно стъпало с радиална хлабина-особености и подходи, сходимост на числената процедура. Част ІІ.  Резултати.”, Годишник на Технически университет, 2008.
  • G. I. Ilieva, R. D. Yosifov, Zl. Zlatev ”MODELING OF 2D COMPRESSIBLE VISCOUS AND TURBULENT FLOW TURBINE CASCADE WITH MOVING TWISTED ROTOR BLADE”, International Conference EMF’2005 22-24.09. 2005
  • Iosifov R. D., Lazarovski N. A., Ilieva G.I.,  INVESTIGATION OF BOUNDARY LAYER IN FLOW PAST TURBINE BLADES” 2004, TU-Varna, ISSN 1311-896X.
  • “INVESTIGATION OF THE AERODYNAMICAL QUALITY OF THE TURBINE LATTICES.” N.A. Lazarovski, R.D.Yossifov, D.A. Kavlakov, G. I. Ilieva, TU-Varna, 2004; „Machine Mechanics”, vol 4, 2005; ISSN 0861-9727.
  • R.D.Yossifov, N.A. Lazarovski, G.I.Ilieva “Two-Dimentional Aerodynamical Model of Turbulent Flow in Turbine Rows”, Proceedings TU-Varna 2003, ISSN 1311-896X.
  • N.A. Lazarovski, R.D.Yossifov, G.I.Ilieva “Aerodynamical Investigations of Turbulent Flow in Turbine Rows in Variable Inlet Conditions”, Proceedings TU-Varna 2003, ISSN 1311-896X.

 

 

 

PROJECTS

 

2018-2021

  • „DYNAMIC -  Towards responsive engineering curricula through Еuropeanisation of dual higher education in sectors of Innovation & Smart Specialisation“

 

2018

  • Modelling and research of water regime and other factors influencing the efficiency of steam boilers exploitation („Моделиране и изследване влиянието на водния режим и други фактори върху ефективността на работа на корабните котли“)

 

2017-2019

  • "Marine propulsion systems based on biomimetics – design, research and analysis".

 

 

2017

  • “Research and validation of specific gas-dynamic features and efficiency of steam turbine working with low flow rates ” („Изследване и валидиране на особеностите в газодинамиката и ефективността на малкоразходна турбина”)
  • Competition “Month of science 2017 ” - ranked first place

 

2015-2016

  • International Project: An Innovative Thrust Vectoring Jet Concept

 

2014-2016

  • Confidential international projects sponsored by ESA и Rolls Royce

 

2011-2015

  • International Project: MAAT –Multibody Advanced Airship for Transport

 

2012-2014

 

2012-2015

  • International Project: CROP - Cycloidal Rotor Optimized for Propulsion

2010-2011

  • International Industrial projects for SNECMA (confidential)

 

2009

  • National Project:  „Изследвания на процесите в корабна хладилна уредба. Усъвършенстване на опитната хладилна уредба към климатична система”

2008

  • National Project: “Research on Processes in Marine Conditioning System” („Изследвания на процесите в корабна климатична уредба. Усъвършенстване на опитната климатична система”)

 

2007

  • National Project: “Numerical Modelling and Research on Aerodynamic Features of Flow through NGN 125 Turbine” („Числено моделиране и изследване на аеродинамиката на течението в турбина NGN 125”)

 

2006

  • “Possibilities for repair and manufacturing of hot parts of gasturbine engine ТНМ 1304” („Проучване на възможностите за ремонт и/или производство на горещи части за газотурбинни двигатели тип ТНМ 1304”)

 

 

2005

  • National Project:  “Research on possibilities for modelling of the aerodynamics features of centrifugal compressor” („Изследване на възможностите за моделиране на аеродинамиката на центробежен компресор”)
  • National Project:  Turbine K-200-130 – research in idle running exploitation phase („Турбина К-200-130 – изследване на работа на празен ход”)

 

 

2004

 

  • National Project:  Project 2/1635/2004: Research on static and dynamic loading of turbine blades of turbine low pressure at Nuclear Power Plant Kozlodui – part 1: Aerodynamic research in case of nominal exploitation regimes” (Проект 2/1635/2004. Изследване на статичното и динамично натоварване на турбинни лопатки от ТНН, работеща в АЕЦ ”Козлодуй” - Аеродинамично изследване на турбинните стъпала в номинален работен режим)
  • National Project:  Project 2/1635/2004: Research on static and dynamic loading of turbine blades of turbine low pressure at Nuclear Power Plant Kozlodui – part 2: Aerodynamic research in case of variable exploitation regimes” (Проект 2/1635/2004. Изследване на статичното и динамично натоварване на турбинни лопатки от ТНН, работеща в АЕЦ ”Козлодуй” - Аеродинамично изследване на турбинните стъпала при променливи работни режими)

 

Awards:

  • Award “VARNA” : “Successful design and approbation of effective methods for long-lasting exploitation of turbines in NPP “Kozlodui”.

 

Editorial Board Member:

 

  • American Journal of Science, Engineering and Technology, Science Publishing Group
  • International Journal of Mechanical Engineering and Application, Science Publishing Group
  • International Journal of Research
  • Scientific journal “Science & Technologies: Oil and Oil Products Pipeline Transportation”
  • International Journal of Emerging Engineering Research and Technology (IJEERT)

 

 

Reviewer:

Journal of Applied Fluid Mechanics; journals of ASME, SAE, AIAA, Elsevier, etc

 

Membership:

 

  • American Society of Mechanical Engineers (ASME)
  • Member of Fundação para a Ciência e Tecnologia
  • Member of WASET – World Academy of Science, Engineering and Technology
  • Member of Conference Organizing Committees of WASET

 

Scientific background and interests: numerical modelling, CFD codes, turbines and compressors, fluid mechanics, thermodynamics, project management, energy systems, propulsion systems and components, turbulence, renewable energy sources, marine machinery,  etc.

Specializations and short courses:

 

  • Shock waves and phenomena, 2013-2014, Technical university - Delft, Holland & Centre for Mechanical and Aerospace Science and Technology (C-MAST), Portugal
  • Supersonic flows, 2012, C-MAST, Portugal
  • Pointwise - geometry and mesh software, 2011, University of Beira Interior, Portugal
  • Tecplot - post-processing software, 2012, UBI, Portugal
  • C++ coding, 2012, UBI, Portugal
  • OpenFOAM, 2011-2012 von Karman Institute for Fluid Dynamics, Rhode Saint Genese, Belgium & UBI, Portugal
  • Advanced turbo machinery and compressors courses, 2011, von Karman Institute for Fluid Dynamics, Rhode Saint Genese, Belgium.
  • Measurement techniques, 2010, von Karman Institute for Fluid Dynamics, Rhode Saint Genese, Belgium
  • Numerical modeling and CFD approaches, 2010-2011, von Karman Institute for Fluid Dynamics, Rhode Saint Genese, Belgium.
  • Unmanned Aerial Vehicles, 2011, von Karman Institute for Fluid Dynamics, Rhode Saint Genese, Belgium
  • Measurement  Data Аquisition, 2011, von Karman Institute for Fluid Dynamics, Rhode Saint Genese, Belgium
  • NATO Advanced Study, 09.2009, Chesme, Turkey
  • “FLUENT - Flow Simulation in Industry”, 07.2004, Sofia, Bulgaria
  • Black Sea University Fellowship - International Summer School in Computational and Experimental Simulation of Combustion and Multi-phase Flows in Advanced Energy Systems, 07.2004, Kirkpinar-Sakarya, Turkey
  • Two-phase flows with industrial applications, 05.2003, “Forschungcentrum-Rossendorf”, Dresden, Germany